installation method of the MA type ceramic module
The basic installation method of the MA type ceramic module is to make the anchorage of the anchorage embedded in the ceramic fiber module into the stud welded on the furnace wall plate and fix it with the nut, or to directly penetrate the center hole of the anchor part, which is embedded in the ceramic module, directly into the expansion card fixed on the furnace wall plate.
The MA type ceramic fiber module is made of various models according to the structure of embedded anchors. The stud and expansion card of the fixed ceramic fiber module are divided into manual welding type and special welding torch type according to the different methods of welding to the furnace wall plate.
The MA type ceramic fiber module is installed in the vertical furnace wall.
The anchorage of MA type ceramic fiber module is not directly exposed to high temperature flue gas.