Construction method of refractory fiber lining
Laying fiber furnace lining, in accordance with the back wall, furnace top, side walls in sequence. At the top of the furnace top and back, the side wall is from top to bottom, so the rear wall is easy to install with the joint of the top, the top and the side wall. All the dimensional errors of the products can be leveled in the lining layer, and the gas tightness of the lining is easy to be guaranteed. In the construction, the fiber felt was coated with high temperature binder. After lining, a layer of surface hardening agent was painted in the fiber lining. It could reduce the shrinkage of fiber products, increase the high temperature strength of the refractory fiber surface, and improve the service life of the lining.