Characteristics of aluminum silicate insulation material
Aluminum silicate composite thermal insulation coatings for new green inorganic coatings, is one component of packaging materials, non-toxic and has excellent sound absorption, high temperature resistance, water resistance, frost resistance, low shrinkage, seamless, non cold bridge, bridge formation: stable and reliable quality, good crack resistance and earthquake resistance, resistance ability, negative pressure light weight, good insulation properties and good workability, water retention, adhesion, surface layer hollowing, construction is not sagging, not sagging and reduce construction consumption and combustion properties of a non combustible material in the temperature range of -40-800 DEG C within a thermal insulation layer, no crack, no shedding, do not burn, acid, alkali and oil etc..
Water absorption and flame retardancy
There is water to make up for the traditional wall insulation coating in large, easy aging of big volume shrinkage, easy to cause the late strength of products is low and reduce the performance of insulation coating cracking phenomenon, and make up of polystyrene particles insulation paint is flammable, fire of harmful gases produced by high temperature and weather is low, flexible and other defects. Aluminum silicate composite thermal insulation coating is the most ideal thermal insulation coating for wall insulation materials, which has the highest safety factor, the comprehensive performance and the construction performance. It can wipe the best economic thickness according to the temperature of different media, and the cost performance is much better than the same performance material.
Sealed and stable
Forming stable, strong adhesive force, convenient and fast construction can effectively shorten the construction period, and won't be affected by the thermal insulation body geometry constraints, especially suitable for interior and exterior wall insulation, central air conditioning air system and specific surface insulation, can prevent leakage and loss of energy gap of traditional materials, form an integral seal. The product meets the implementation standard of "building thermal insulation mortar" GB/T20473-2006, and meets the national fire protection and environmental protection requirements.