Model NO.: STD, HP, HA, DZ, HZ
Shape: Ceramic Fiber Blanket
Specification: 25*610*7200mm, 50*610*7200mm, 13*610*14400mm
HS Code: 6806100090
Cmax ceramic fiber blanket is made from high quality gao-ling clay, high purity alumina and silica oxides by spun or blown process. It is asbestos free. No chemical binder is added. Double-size needling provides blanket with great tensile or handling strength for easy installation. Blankets are available in various classified temperature from 1260oC to 1430oC.
Cmax ceramic fibre blanket is resistant to most chemicals attack except hydrofluoric phosphoric acid and high pH alkali(na2o or k2o). Its thermal and physical properties can not be affected by oil, steam and water, very good thermal insulating materials.
Low thermal conductivity
Low heat storage
Resilient to thermal stock
High tensile strength
Easy to install
Petrochemical process heater refractory fiber lining
Heat treating furnace or intermittent (shuttle) kiln hot face lining
General furnace backup insulation
Heat seals for kiln car or furnace door
High temperature acoustic
Non-standard sizes are available upon request.
This information, subject to change, is offered solely for your consideration. Users of our products should make their own tests to determine the suitability of each product for their particular purposes.
|BULK DENSITY(kg/m 3 )||96/128||96/128||96/128||96/129|
THERMAL SHRINKAGE 24HRS |
(Density 128kg/m 3 )
|≤ 3||≤ 3||≤ 3.5||≤ 3.5|
THERMAL CONDUCTIVITY(W/m. k) |
(Density 128kg/m3 )
|Fe2O3||≤ 0.4||≤ 0.3||≤ 0.3||≤ 0.3|